2024 Schulte Rotary Cutter Mowers FX-520
- Year 2024
- Make Schulte
- Model Rotary Cutter Mowers
2024 Schulte Rotary Cutter Mowers FX-520
2024 Schulte Rotary Cutter Mowers FX-520
Features may include:This 20 foot wide, five rotor design optimizes cutting performance in a rotary cutter, increases productivity and delivers extremely even distribution over competitors 20’ models.
Unique 6 Gear Box layout, 260 hp divider box, 225 hp down boxes, 1000rpm driveline gives unsurpassed cutting performance with higher cut speeds.
5 Slip Clutches, 1 at each down box protects the drive line. Also, shear pin at the input shaft on the divider box.
Continuously welded 7 ga modular deck design improves strength and reduces rusting.
Hitch Lift Assist helps to lift the mower over obstacles so as to prevent undo stress on blades and down shafts.
A hydraulic phasing cylinder system ensures an accurate parallel lift across the rotary cutter.
Engine
Minimum Engine Power
Tractor: 100 HP (75 kW)
Engine Power
Divider Box rating: 260 hp (194kw) | Down Box rating: 225 hp (168kw) Intermittent use only
Operational
Operating Speed
Blade Tip: 16000 ft/min (4900m/m)
Hydraulics
Hydraulic Type
Tractor: 2 double acting circ, 1,750 psi (12 MPA)
Dimensions
Dimensions
Cutting capacity: 2" (51mm) (Fixed Knife Unit) 4" (102mm) (Pan Unit) | Blade Overlap: 6" (153mm) | Deck Thickness: .180" (7 ga) (4.6mm) | Skirt Thickness: 1/4" (6.4mm) | Wing Operating Range: 20 degrees down to 90 degrees up | Wing Float Range: 20 degrees down to 40 degrees up
Transport Clearance
13” (330 mm)
Cutting Width
240” (6.1 m)
Overall Width
247” (6.2 m)
Overall Height
Transport: 148” (3.76 m)
Overall Length
242” (6.15 m)
Transport Width
104" (2.6 m)
Transport Height
120” (3.05 m)
Height
Cutting: 2" - 17.5” (51 - 445 mm) depending on tire size
Weights
Weight
6525lbs. (2960 kg) (single chain, 6 tires, pans) | Hitch: 2280 lbs (1034kg) (single chain, 6 tires, pans)