Current Freeman Small Side-Feed Baler 375 Small Side-Feed Baler 375 Small Side-Feed Baler 375

2017 Freeman Small Side-Feed Baler 375 Base

2017 Freeman Small Side-Feed Baler 375 Base

Swipe to View More

  • Year 2017
  • Make Freeman
  • Model Small Side-Feed Baler 375
  • Engine 4 Cylinder Diesel: D/TCD 914 Deutz air cooled engine
Shop Freeman Pre-Owned
Product Details Specifications Photos
2017 Freeman Small Side-Feed Baler 375 Base

2017 Freeman Small Side-Feed Baler 375 Base

  • Year 2017
  • Manufacturer Freeman
  • Model Name Small Side-Feed Baler 375
  • Trim Name Base
  • Generic Type (Primary) Square Baler
  • Engine 4 Cylinder Diesel: D/TCD 914 Deutz air cooled engine
  • Stroke Length: 30" (76.2 cm)

2017 Freeman Small Side-Feed Baler 375

The Freeman model 270/275/370/375 baler is designed for higher capacity by increasing the power each plunger stroke delivers. The 420 lb. flywheel, turning at over 600 RPM, drives two 210 lb. bull gears, which in turn power the 300lb. plunger at 84 strokes per minute

By using the kinetic energy from the heavy-duty flywheel, bull gears and plunger, these balers can bale up to 18 tons of straw and up to 30 tons of alfalfa per hour!

Features may include:
  • Left side tires: Tandem highway tires, 10 ply, 8 hole wheels & heavy hubs
  • Right side tire: Single highway tire, 10ply, 8 hole wheels & heavy hubs
  • Automatic knotter luber (on conventional knotters)
  • Extra wide pickup, 76" including 6" flare
  • Lights: 1 pickup and 2 rear work lights; highway lights
  • E-Z Glide remote throttle & tension controls from tractor seat
  • Engine hour meter, oil and amp warning lights
  • Heavy duty pump-type bull gear luber
  • Nine compartment twine box on twine balers (12" x 12" compartment size)
  • Bale counter
  • Heavy duty battery
  • Automatic hydraulic tension control with 4-way squeeze
  • Dual rams on tension control
  • Bale chute: Combination L.H. or R.H. turning
  • 30 gallon fuel tank on 3-Tie, 16 gallon on 2-Tie.

Engine

Engine 4 Cylinder Diesel: D/TCD 914 Deutz air cooled engine
Stroke Length: 30" (76.2 cm)

Drivetrain

Drive System Chain

PTO

PTO Type Hydraulic (minimum 65hp): 540 RPM w/oil cooler

Performance

Operating Speed Rated: 30 tons/hour (alfalfa) 30.48 mt/hour | Stroke Per Minute: 84

Chassis

Chassis Cross Section: 16" x 22" (41x56 cm) , 15" x 22" (38x56 cm)

Wheels & Tires

Range, Highway Right single, Left tandem
Tires, Rear Specification Flotation: 8 ply, 8 hole, heavy hub 10 ply, 8 hole, heavy hub
Wheels Fly Wheel: 420 lbs. (191 kg)

Dimensions

Length Bale: 18" to 52" | Camber: 9´ x 0" (275 cm)
Width Bale: 70" (177.8 cm) | With Flares: 76" (193.04 cm)
Overall Length 26´ 0" (793 cm)
Overall Width With LH single wheel: 10’ 4” | With LH tandem wheel: 11´ 4" (344 cm)
Overall Height Engine: 8´ 1" (246 cm) | Hydro Driveline: 5´ 6" (168 cm)

Capacities

Fuel Capacity 30 gal (114 ltr)

Weights

Gears Bull Gear(2 Per Bale): 210 lbs. (95 kg) each
Weight Range: 90 to 180 lbs | Engine: 10,050 lbs. (4560 kg) | Hydro: 9250 lbs. (4200 kg)

Features

Features Tension Control: 2-Ram hydraulic | Teeth Quantity: 156 on 2.5" centers on 6 tooth bars | Roller: Sealed Ball-Bearing Rollers (bottom) Wear Pads (Top)

Product Photography