2017 Freeman Small Side-Feed Baler 380 Base

Information

2017 Freeman Small Side-Feed Baler 380

The line of Freeman model 280/285/380/385 pull-type balers are similar to the model 270/370, but with added features to make it an even more user-friendly machine.

The Remote Control provides easy operation for various baling functions from the tractor, including pickup height, drawbar position, bale density and baler operating speed. The Remote Control also provides a digital display of the bale count, fuel level, plunger strokes per minute and plunger strokes per bale.

Features may include:
  • Left side tires: Tandem highway tires, 10 ply, 8 hole wheels & heavy hubs
  • Right side tire: Single highway tire, 10ply, 8 hole wheels & heavy hubs
  • Automatic knotter luber (on convenrional knotters)
  • "Super Sweep" extra wide pickup, 76" including 6" flare
  • Lights: 1 pickup light, 2 rear work lights & highway lights
  • Engine hour meter, oil and amp warning lights
  • Heavy duty pump-type bull gear luber
  • 12 compartment twine box (12" x 12" compartment size)
  • Heavy duty battery
  • Bale chute: Combination L.H. or R.H. turning
  • 30 gallon fuel tank
  • Electronic, in-tractor controls
  • Auto tension release during tie cycle
  • Hay saver wheel
  • Hydraulic swing hitch
  • Hydraulic pickup lift
  • Bale weight indicator, hood mount
  • Air blower for knotters

Photos

Highlights

  • Moses Lake, Washington
  • 2017
  • Freeman
  • Small Side-Feed Baler 380 Base
  • 4 Cylinder Diesel: 231 CID (3.8 ltr) Deutz air cooled engine
  • Cross Section: 16” x 22” (41x56 cm)
  • Available
  • Pick Up: 70” (175 cm) | With Flares: 76” (194 cm)

Specifications

  • 2017
  • Freeman
  • Small Side-Feed Baler 380
  • Base
  • Square Baler
  • 4 Cylinder Diesel: 231 CID (3.8 ltr) Deutz air cooled engine
  • Length: 30” (76.2 cm)
  • Chain
  • Hydraulic (minimum 65hp): 540 RPM w/oil cooler
  • Rated: 30 tons/hour (alfalfa) 30.5 mt/hour | Stroke Per Minute: 84
  • Cross Section: 16” x 22” (41x56 cm)
  • R. single, L. tandem
  • Flotation: 8 ply, 8 hole, heavy hub
  • Fly Wheel: 420 lb (191 kg) each
  • Bale: 18” to 52”
  • Pick Up: 70” (175 cm) | With Flares: 76” (194 cm)
  • 26’ 0” (793 cm)
  • Std Tires: 11’ 4” (344 cm)
  • Engine: 8’ 1” (246 cm) | Hydro Driveline: 5’ 6” (168 cm)
  • 30 gal (114 ltr)
  • Bull Gear(2 Per Bale): 210 lbs (95 kg) each
  • Range: 90 to 180 lbs | Engine: 10,050 lbs (4560 kg) | Hydro: 9250 lbs (4200 kg)
  • Density Control: Hydraulic Remote Controller. Top, Bottom & Side Rails | Teeth Quantity: 156 on 2.5” centers on six-tooth bars | Roller: Sealed ball-bearing rollers (bottom), wear pads (top) | Knoter: Conventional