2017 Freeman Small Side-Feed Baler 275 Base

Information

2017 Freeman Small Side-Feed Baler 275

The Freeman model 270/275/370/375 baler is designed for higher capacity by increasing the power each plunger stroke delivers. The 420 lb. flywheel, turning at over 600 RPM, drives two 210 lb. bull gears, which in turn power the 300lb. plunger at 84 strokes per minute

By using the kinetic energy from the heavy-duty flywheel, bull gears and plunger, these balers can bale up to 18 tons of straw and up to 30 tons of alfalfa per hour!

Features may include:
  • Left side tires: Tandem highway tires, 10 ply, 8 hole wheels & heavy hubs
  • Right side tire: Single highway tire, 10ply, 8 hole wheels & heavy hubs
  • Automatic knotter luber (on conventional knotters)
  • Extra wide pickup, 76" including 6" flare
  • Lights: 1 pickup and 2 rear work lights; highway lights
  • E-Z Glide remote throttle & tension controls from tractor seat
  • Engine hour meter, oil and amp warning lights
  • Heavy duty pump-type bull gear luber
  • Nine compartment twine box on twine balers (12" x 12" compartment size)
  • Bale counter
  • Heavy duty battery
  • Automatic hydraulic tension control with 4-way squeeze
  • Dual rams on tension control
  • Bale chute: Combination L.H. or R.H. turning
  • 30 gallon fuel tank on 3-Tie, 16 gallon on 2-Tie.

Photos

Highlights

  • Moses Lake, Washington
  • 2017
  • Freeman
  • Small Side-Feed Baler 275 Base
  • 3 Cylinder Diesel: D/TCD 914 Deutz air cooled engine | 4 Cylinder Diesel: D/TCD 914 Deutz air cooled engine
  • Cross Section: 16" x 18" (41x46 cm)
  • Available
  • Bale: 70" (177.8 cm) | With Flares: 76" (193.04 cm)

Specifications

  • 2017
  • Freeman
  • Small Side-Feed Baler 275
  • Base
  • Square Baler
  • 3 Cylinder Diesel: D/TCD 914 Deutz air cooled engine | 4 Cylinder Diesel: D/TCD 914 Deutz air cooled engine
  • Length: 30 (76.2 cm)
  • Chain
  • Hydraulic (minimum 65hp): 540 RPM w/oil cooler
  • Rated: 25 tons/hour (alfalfa) 25.4 mt/hour | Stroke Per Minute: 84
  • Cross Section: 16" x 18" (41x46 cm)
  • Right single, Left single
  • Flotation: 8 ply, 8 hole, heavy hub
  • Fly Wheel: 420 lbs. (191 kg)
  • Bale: 18" to 52" | Camber: 9´ x 0" (275 cm) - standard | Str
  • Bale: 70" (177.8 cm) | With Flares: 76" (193.04 cm)
  • 26´ 0" (793 cm)
  • With LH single wheel: 10´ 0" (305 cm) | With LH tandem wheel: 11´ 0" (336 cm)
  • Engine: 8´ 1" (246 cm) | Hydro Driveline: 5´ 6" (168 cm) Hydro/Driveline
  • 16 gal (60.5 ltr)
  • Bull Gear(2 Per Bale): 210 lbs. (95 kg) each
  • Range: 60 to 120 lbs. | Engine: 8600 lbs. (3900 kg) | Hydro: 8200 lbs. (3720 kg)
  • Tension Control: 1-Ram hydraulic | Teeth Quantity: 156 on 2.5" centers on 6 tooth bars | Roller: Sealed Ball-Bearing Rollers (bottom) Wear Pads (Top)